氣墊效應 示意圖
Air-cushion effect
Air-cushion effect
【氣墊效應】T-N.T. 的專利氣墊內管設計：T-N.T. 專利內管採用同一支內管中的雙內徑設計。由於氣流推進速度快於BB彈，部分氣體會在BB彈射出前先行逸出。這樣的設計能讓位於BB彈後方的高壓氣體在通過較大內徑區段時完全包覆BB彈，當BB彈射出時便形成「前導」效果，能有效穩定彈道，讓射擊軌跡更為筆直且一致。
此外，內管同時被設計為「通用平台」，玩家只需依槍型更換HOP膠皮，即可安裝於市面上九成以上的Airsoft氣槍產品。
※氣墊長度：40-50MM
※短內管無氣墊槽設計(220MM以下)
※精密管材質：青銅，表面電鍍化學鎳。
※Inner barrel material: bronze&electroplated chemical nickel.
[Air-Cushion Effect]
T-N.T.’s patented inner barrel features a dual-diameter design within the same barrel. Since airflow travels faster than the BB, a portion of the gas escapes ahead of the BB before it leaves the barrel. This allows the high-pressure gas behind the BB to completely envelop it as it passes through the enlarged diameter section. When the BB is ejected, this creates a “Front Guide” effect that stabilizes the ballistic trajectory, ensuring a straighter and more consistent flight path toward the target.
In addition, the barrel is designed as a universal platform. By simply replacing the hop-up bucking according to the gun type, it can be installed on more than 90% of airsoft guns available on the market.
※Air cushion length:40-50MM
※Shorter barrel have no Air-cushion design (Shorter than 220mm)
※inner barrel material: bronze with electroplated chemical nickel surface.
此外，內管同時被設計為「通用平台」，玩家只需依槍型更換HOP膠皮，即可安裝於市面上九成以上的Airsoft氣槍產品。
※氣墊長度：40-50MM
※短內管無氣墊槽設計(220MM以下)
※精密管材質：青銅，表面電鍍化學鎳。
※Inner barrel material: bronze&electroplated chemical nickel.
[Air-Cushion Effect]
T-N.T.’s patented inner barrel features a dual-diameter design within the same barrel. Since airflow travels faster than the BB, a portion of the gas escapes ahead of the BB before it leaves the barrel. This allows the high-pressure gas behind the BB to completely envelop it as it passes through the enlarged diameter section. When the BB is ejected, this creates a “Front Guide” effect that stabilizes the ballistic trajectory, ensuring a straighter and more consistent flight path toward the target.
In addition, the barrel is designed as a universal platform. By simply replacing the hop-up bucking according to the gun type, it can be installed on more than 90% of airsoft guns available on the market.
※Air cushion length:40-50MM
※Shorter barrel have no Air-cushion design (Shorter than 220mm)
※inner barrel material: bronze with electroplated chemical nickel surface.
※短內管無氣墊槽設計※
※Shorter barrel have no Air-cushion design (Shorter than 220mm)※
※Shorter barrel have no Air-cushion design (Shorter than 220mm)※
因為內管太短氣墊效應不明顯，所以220mm以下的精密管無氣墊槽設計。
Because the inner barrel is too short and the air cushion effect is not obvious, inner barrels below 220mm have no air cushion groove design.
Because the inner barrel is too short and the air cushion effect is not obvious, inner barrels below 220mm have no air cushion groove design.