【HOP下壓塊的選擇？】
大多數原裝的圓柱形下壓塊與單點式下壓的膠皮因其下壓面積較侷限，有時更換彈種在射擊表現上較為不足。
HOP下壓塊也是間接影響到愛槍射擊性能的核心改裝品中的一部份，雖然各廠牌所設計的HOP膠皮內部的下壓點已經固定無法改變，但若搭配適當的HOP下壓塊能更完整的發揮出膠皮本身的性能表現。

【T-NUB - 標準下壓塊】
標準泛用型，適用於大部分使用圓柱形樣式下壓塊的電動槍或其他槍款。
但仍需視不同廠牌樣式的HOP座、內管HOP窗口等實際條件對HOP下壓塊進行修剪及微調以順利安裝。
●材質：橡膠
●寬度：3.95mm

【TR-NUB - 寬版下壓塊】
推薦用於狙擊槍，因為有著更寬大的下壓面積，多數手拉狙擊槍款HOP座的下壓桿幾乎皆是使用寬版配置，但仍需視不同廠牌樣式的HOP座、內管HOP窗口等實際條件判斷是否適用。
●有70度與80度可供選擇，可依照初速高低選擇不同搭配軟硬度的HOP下壓塊使用。
●材質：矽膠
●寬度：4.9mm

【POSITIONING NUB - 定位下壓塊】
T-N.T. 所出品的數款HOP座皆已改款為使用定位下壓塊。
可藉由其定位凸點結合下壓桿，有效避免因震動而產生壓塊位移的情況，進而維持穩定的射擊表現。
●材質：橡膠
● 5*6mm 尺寸 為多數步槍槍款HOP座所使用，並有70度與80度兩種度數可供選擇。
● 6*6mm 尺寸 為狙擊槍款HOP座所使用，並有70度與80度兩種度數可供選擇。

※以上皆為基本使用原則，玩家仍可根據使用習慣自行改變各種配置與微調※

【The choice of  HOP nub? 】
Most of the original cylindrical HOP nub and single-point HOP bucking are sometimes insufficient in shooting performance due to their limited pressing area.
The HOP nub is also a part of the core modification products that indirectly affect the shooting performance of your airsoft BB gun. Although the contact surface inside the HOP bucking designed by each brand has been fixed and cannot be changed, if it is matched with an appropriate HOP nub it can give full play to the performance of the HOP bucking itself.

【T-NUB - Standard nub】
Standard universal type, suitable for most AEG or other gun models that use a cylindrical style HOP nub.
However, it is still necessary to trim and fine-tune the HOP nub according to the actual conditions such as the HOP chamber and the inner barrel HOP window of different brands for smooth installation.
●Material: Rubber
●Width: 3.95mm

【TR-NUB - Wider nub】
It is recommended for sniper rifles, because it has a wider pressing area, and the HOP lever of most bolt action sniper rifle are almost all configured with a wider version, but it still depends on the HOP chamber and inner barrel HOP window or another actual conditions to determine whether it is applicable.
●There are 70 degrees and 80 degrees to choose from, you can choose different HOP nub with hardness according to the initial speed.
●Material: Silicone
●Width: 4.9mm

【Positionning NUB 】
At present, several HOP chambers produced by T-N.T. have been changed to use positioning HOP nub.
By combining its positioning bumps with the HOP lever, it can effectively avoid the displacement of the HOP nub due to vibration, thereby maintaining a stable shooting performance.
●Material: Rubber
● 5*6mm size is used for most rifle HOP chamber, and there are two degrees of 70 and 80 degrees to choose from.
● 6*6mm size is used for sniper rifle HOP chamber, and there are two degrees of 70 and 80 degrees to choose from.


※The above are all basic principles of use, players can still change various configurations and fine-tuning according to their usage habits ※

---

【T-NUB / TR-NUB】

【T-N.T.】T-NUB for AEG

NT$105.00

【T-N.T.】TR-NUB / 70°

NT$125.00

【T-N.T.】TR-NUB / 80°

NT$125.00

---

【POSITIONING NUB】

【T-N.T.】Positioning NUB (STD / 70° / 5*6mm)

NT$125.00

【T-N.T.】Positioning NUB (STD / 80° / 5*6mm)

NT$125.00

【T-N.T.】Positioning NUB (WIDER / 70° / 6*6mm)

NT$125.00

【T-N.T.】Positioning NUB (WIDER / 80° / 6*6mm)

NT$125.00

---

​MADE IN TAIWAN