【T-N.T. APS-X HOP-UP SYSTEM】
​
WE M14 GBBR FULL HOP-UP RETROFIT KIT 

※此款產品為束環改款※
※This product is the clamp ring upgraded version.※

​【TAIWAN T-N.T. STUDIO】 2023年 全新產品
WE M14 GBBR專用 一體式CNC HOP-UP座總成 / 成套套組

製程結合開模、沖壓、CNC工程於一身的全新產品！

1. 本體採用鋁合金CNC精密製造，表面經噴砂及陽極處理。
即使在WE M14的強大後座力之下依然穩固牢靠，徹底擺脫傳統兩片式設計的螺絲易鬆脫問題。

2. HOP-UP調整輪設計有雙邊溝槽，使沖壓鋼片雙邊同時受力下拉，可提供平均的下壓力度，徹底擺脫傳統設計之左右受力不均問題；內嵌O環，止滑效果好，在WE M14的強大後座力之下依然穩固不滑動，有效維持調整完畢後的理想HOP-UP下壓量。

3. 沖壓鋼片下壓寬度位置皆經過模擬與精心計算最佳位置，搭配調整輪無段調整，方便進行HOP-UP細部微調，有效提升精準度與延伸飛行距離，讓這把經典的M14也能展現令人驚豔的射擊性能！
本產品提供有：單HOP-UP座套組 (含H.L.R.膠皮) 以及 成套套組 (膠皮、S+內管、HOP座) 可供選購。
-
【TAIWAN T-N.T. STUDIO】2023 New release products

WE M14 GBBR one-piece CNC HOP-UP chamber set / complete set
It is a brand new product that combines mold opening, stamping and CNC engineering in one manufacturing process.

1. The main body is precision manufactured by aluminum alloy CNC, and the surface is sandblasted and anodized.
Even under the strong recoil of the WE M14, it is still stable and reliable, completely getting rid of the issues that the screws of the traditional two-piece design are easy to loosen.

2. The HOP-UP adjustment wheel is designed with bilateral grooves, so that both sides of the stamped steel sheet can be pulled down at the same time, which can provide an average downforce and completely get rid of the issues of uneven force of the traditional design; the embedded O-ring prevents slipping the effect is good, even under the strong recoil of the M14, it still effectively maintains the ideal level of HOP-UP after adjustment.

3. The position of the pressing width of the stamped steel sheet has been simulated and carefully calculated for the best position. It is matched with the adjustment wheel for stepless adjustment, which is convenient for fine-tuning the HOP-UP, effectively improving the accuracy and extending the BB flight distance. This classic M14 also can show amazing shooting performance!!

This product provides : HOP-UP chamber set (including H.L.R. bucking) and complete set (H.L.R. bucking, S+ inner barrel, HOP chamber) are available for purchase.

​​※All retrofit kits are assembled by our professional technicians, but there may still be slight tolerances between different batches of airsoft guns. It is recommended that you must have relative DIY ability before purchasing.※

---

●安裝前注意事項： 原廠調整輪溝槽較窄，將調整輪溝槽比照原廠斜度加寬(需有DIY能力)

Picture Explanation

---

Specification:

• WE M14 GBBR / M1A SOCOM GBBR RETROFIT KIT 410mm 
• WE M14 GBBR / EBR MOD 1 GBBR RETROFIT KIT 440mm
• WE M14 GBBR / EBR MOD 0 GBBR RETROFIT KIT 540mm

---

​​​※精密管材質：青銅，表面電鍍化學鎳。​
※Inner barrel material: bronze&electroplated chemical nickel.

---

【S+ 精密雙内徑日蝕氣墊內管】 
S+ Precision Dual diameter Air-cushion inner barrel 

【WE M14 Retrofit kit】S+ 410mm

NT$4,600.00

【WE M14 Retrofit kit】S+ 440mm

NT$4,650.00

【WE M14 Retrofit kit】S+ 545mm

NT$4,800.00

​Material : Aluminum, Bronze, Rubber

---

【HOP-UP CHAMBER & SPARE HOP-UP BUCKING】

【WE M14 HOP-UP Chamber set】

NT$2,250.00

【H.L.R. BUCKING】Rubber / GBB / 50°

NT$525.00

【H.L.R. BUCKING】Rubber / GBB / 60°

NT$525.00

【T-HOP BUCKING】GBB / 50°

NT$525.00

【T-HOP BUCKING】GBB / 60°

NT$525.00

​Material : Aluminum, Rubber

---

MADE IN TAIWAN