【T-N.T. APS-X HOP-UP SYSTEM】
SILVERBACK-SRSA1/A2
BOLT HEAD ASSEMBLY (Not suitable for HTI)
T-N.T. STUDIO 所推出的獨創設計熱銷產品：SILVERBACK SRSA1/A2系列專用汽缸頭拉柄總成，正是SRS的最後一塊拼圖!! 獨家防轉推彈嘴設計，避免槍機在閉鎖時推嘴對膠皮造成的旋轉應力，因而導致彈道側偏，有效提升彈道穩定度。
產品特色：
●可避免操作槍機上膛後，在閉鎖拉柄時推彈嘴對HOP膠皮所造成的旋轉力，進而增加彈道穩定度。
●全中碳鋼材質製作，磷酸鹽表面處理，兼顧美觀與耐用。
●設計有拉柄定位功能，定位功能確實。
●可更換推嘴設計，可依個人需求更換不同長度。
●15.8mm推嘴可造成較高膛壓，更適用於使用加重彈。
套組內含：拉柄、基座、標準長度推嘴16.0mm (15.8mm推嘴須另購)
●The nozzle will not rotate to the right with the locking action of the pull handle during the ejection, which ensures that the ejection position is more accurate and effectively improves the stability!
●All components are made of medium carbon steel CNC with phosphate treatment on the surface.
●The inner diameter of the nozzle is 4.0mm, which can correspond to the use of SRS original air-brake.
●The set comes standard with a 16.0mm standard length nozzle, and a 15.8mm nozzle can be purchased for replacement if required.
Customizable tuned nozzle length :
16.0mm nozzle : Original length.
15.8mm nozzle : Suitable for use with more heavier BBs.
Nozzle inner diameter : 4mm.
※ It is recommended to apply a little screw glue before tightening the screws, and please don’t tighten them too much to avoid deformation of the inner wall ※
SILVERBACK-SRSA1/A2
BOLT HEAD ASSEMBLY (Not suitable for HTI)
T-N.T. STUDIO 所推出的獨創設計熱銷產品：SILVERBACK SRSA1/A2系列專用汽缸頭拉柄總成，正是SRS的最後一塊拼圖!! 獨家防轉推彈嘴設計，避免槍機在閉鎖時推嘴對膠皮造成的旋轉應力，因而導致彈道側偏，有效提升彈道穩定度。
產品特色：
●可避免操作槍機上膛後，在閉鎖拉柄時推彈嘴對HOP膠皮所造成的旋轉力，進而增加彈道穩定度。
●全中碳鋼材質製作，磷酸鹽表面處理，兼顧美觀與耐用。
●設計有拉柄定位功能，定位功能確實。
●可更換推嘴設計，可依個人需求更換不同長度。
●15.8mm推嘴可造成較高膛壓，更適用於使用加重彈。
套組內含：拉柄、基座、標準長度推嘴16.0mm (15.8mm推嘴須另購)
●The nozzle will not rotate to the right with the locking action of the pull handle during the ejection, which ensures that the ejection position is more accurate and effectively improves the stability!
●All components are made of medium carbon steel CNC with phosphate treatment on the surface.
●The inner diameter of the nozzle is 4.0mm, which can correspond to the use of SRS original air-brake.
●The set comes standard with a 16.0mm standard length nozzle, and a 15.8mm nozzle can be purchased for replacement if required.
Customizable tuned nozzle length :
16.0mm nozzle : Original length.
15.8mm nozzle : Suitable for use with more heavier BBs.
Nozzle inner diameter : 4mm.
※ It is recommended to apply a little screw glue before tightening the screws, and please don’t tighten them too much to avoid deformation of the inner wall ※
Material: Steel
MADE IN TAIWAN
MADE IN TAIWAN