【T-N.T. APS-X HOP-UP SYSTEM】
ARES KAR98K (CLA-002, CLA-003)
FULL HOP-UP RETROFIT KIT
產品特色：
1. HOP座本體部件皆為6061鋁合金CNC精密製造，表面噴砂&陽極處理。
2. 延續TALON Mk-1 擋彈器前蓋總成的優良設計，玩家可以非常容易微調HOP下壓區左右平衡點，搭配H.L.R. 膠皮與6*6大面積弧面下壓塊，更能達到穩定且深遠的彈道表現。
3. 鋁製加大擋彈器，凹槽加深加大，更能牢靠的固定BB彈丸，大幅降低雙彈與卡彈機率，上彈更順暢。
4. 精密模擬最佳進彈位置，膠皮全包覆設計，氣密性更優秀，內管採用左右機米螺絲固定，穩固不搖晃。
5. 套組標配 S+ 545mm 精密雙內徑氣墊內管 & H.L.R. 新款膠皮 (亦可選配TR-HOP膠皮)，高效能的膠皮與內管相輔相成，無論下場遊戲或是靜態打靶，都能有優秀的高效能展現。
Features :
1. Each part of the HOP chamber is made of 6061 aluminum alloy CNC precisely, and the surface is sandblasted & anodized.
2. Continuing the excellent design of the front cover assembly of the TALON Mk-1 BB stopper, it is very easy to fine-tune the left and right balance of the HOP-UP. With H.L.R. bucking and 6*6 positioning HOP nub, more stable and far-reaching range performance.
3. Aluminum BB stopper, the groove is deepened and enlarged, which can more reliably fix the BBs, greatly reduce the probability of double feeding and jamming, make the reloading more smoothly.
4. The feeding position precisely simulates the best position, HOP-UP bucking fully covered design, and the air-seal is excellent. The inner barrel is fixed with left and right jimi screws, which is very stable and not shake at all.
5. The standard set is S+ 545mm Precision dual inner diameter air-cushion inner barrel & H.L.R. bucking (optional : TR-HOP bucking), which makes your ARES Kar98K more powerful, no matter in the field game or target shooting, all have excellent performance!!
1. HOP座本體部件皆為6061鋁合金CNC精密製造，表面噴砂&陽極處理。
2. 延續TALON Mk-1 擋彈器前蓋總成的優良設計，玩家可以非常容易微調HOP下壓區左右平衡點，搭配H.L.R. 膠皮與6*6大面積弧面下壓塊，更能達到穩定且深遠的彈道表現。
3. 鋁製加大擋彈器，凹槽加深加大，更能牢靠的固定BB彈丸，大幅降低雙彈與卡彈機率，上彈更順暢。
4. 精密模擬最佳進彈位置，膠皮全包覆設計，氣密性更優秀，內管採用左右機米螺絲固定，穩固不搖晃。
5. 套組標配 S+ 545mm 精密雙內徑氣墊內管 & H.L.R. 新款膠皮 (亦可選配TR-HOP膠皮)，高效能的膠皮與內管相輔相成，無論下場遊戲或是靜態打靶，都能有優秀的高效能展現。
Features :
1. Each part of the HOP chamber is made of 6061 aluminum alloy CNC precisely, and the surface is sandblasted & anodized.
2. Continuing the excellent design of the front cover assembly of the TALON Mk-1 BB stopper, it is very easy to fine-tune the left and right balance of the HOP-UP. With H.L.R. bucking and 6*6 positioning HOP nub, more stable and far-reaching range performance.
3. Aluminum BB stopper, the groove is deepened and enlarged, which can more reliably fix the BBs, greatly reduce the probability of double feeding and jamming, make the reloading more smoothly.
4. The feeding position precisely simulates the best position, HOP-UP bucking fully covered design, and the air-seal is excellent. The inner barrel is fixed with left and right jimi screws, which is very stable and not shake at all.
5. The standard set is S+ 545mm Precision dual inner diameter air-cushion inner barrel & H.L.R. bucking (optional : TR-HOP bucking), which makes your ARES Kar98K more powerful, no matter in the field game or target shooting, all have excellent performance!!
ARES 98K安裝秘訣
若是購買我們的升級套件來自行組裝，我們提供一個小秘訣，可以使上彈更順暢。
1.將汽缸頭取下
2.倒角
3.拋光
4.裝回
按照此步驟，即可降低卡彈與雙彈，也可避免膠皮毛邊。
1.將汽缸頭取下
2.倒角
3.拋光
4.裝回
按照此步驟，即可降低卡彈與雙彈，也可避免膠皮毛邊。
ARES 98K Installation Tips
If you buy our upgrade kit and assemble it yourself, we provide a little tip to make the loading smoother.
1. Remove the cylinder head
2. Chamfer
3. Polishing
4. Reinstall
By following this procedure, you can reduce the jam and double feeding, and avoid the rubber burrs.
If you buy our upgrade kit and assemble it yourself, we provide a little tip to make the loading smoother.
1. Remove the cylinder head
2. Chamfer
3. Polishing
4. Reinstall
By following this procedure, you can reduce the jam and double feeding, and avoid the rubber burrs.
|
|
|
|
|
|
ARES Kar98k /SMLE British No.4 MK1 /升級套件 / UPGRADE KIT
Material: Aluminum, Bronze, Rubber
MADE IN TAIWAN