【T-N.T. APS-X HOP-UP SYSTEM】
TL-HOP BUCKING SERIES
規格選項 : GBB / AEG
度數選項 : 50° / 60°
TL-HOP BUCKING SERIES
規格選項 : GBB / AEG
度數選項 : 50° / 60°
TL+HOP BUCKING SERIES
規格選項 : GBB
度數選項 : 70°
度數選項 : 70°
T-N.T. STUDIO 推出HOP-UP膠皮全新產品：TL-HOP膠皮 系列
以H.L.R.膠皮為基礎，不同於大部分「方方角角」的下壓區設計，我們沿襲了「由前到後、由左至右」弧面下壓區的設計，緩和了受力與釋放的角度，有利於提高彈道穩定性，適合低初速電動槍或競技短槍使用。
建議對應彈重：0.12g～0.32g
※GBB規格：本產品是常規版本，可組裝與MARUI原廠相同規格(常規)的精密管與HOP座使用。
※2023年12月起，T-N.T.所有短木倉升級套件(THE ONE系列)，標配膠皮將改為TL皮。
※不適用於早期窄窗規格的內管，安裝前請確認內管入口處的HOP窗是否有足夠空間。
以H.L.R.膠皮為基礎，不同於大部分「方方角角」的下壓區設計，我們沿襲了「由前到後、由左至右」弧面下壓區的設計，緩和了受力與釋放的角度，有利於提高彈道穩定性，適合低初速電動槍或競技短槍使用。
建議對應彈重：0.12g～0.32g
※GBB規格：本產品是常規版本，可組裝與MARUI原廠相同規格(常規)的精密管與HOP座使用。
※2023年12月起，T-N.T.所有短木倉升級套件(THE ONE系列)，標配膠皮將改為TL皮。
※不適用於早期窄窗規格的內管，安裝前請確認內管入口處的HOP窗是否有足夠空間。
更多詳細資訊
【關於初速】
TL膠皮專為低初速電動槍、手槍、競技短槍或是與 MARUI GBB 規格之長槍使用，建議初速約 0.8J~1.5J 左右。高初速需求建議選擇H.L.R.膠皮。
【對應彈重】
TL膠皮專為輕彈設計，最主要的目的是「增加輕彈的穩定性」，建議對應彈重為0.12g～0.32g。
【度數選擇】
一般正常條件下皆建議選用60度膠皮即可，50度膠皮建議用於低氣溫寒冷地區。
【規格說明】
TL膠皮包含 GBB 及 AEG 規格供玩家選擇。其中 GBB 規格是「常規版本」，可組裝與MARUI原廠相同規格(常規)的精密管與HOP座使用，只要規格相同，GBB長槍也可搭配此款膠皮。
※以上皆為基本使用原則，玩家仍可根據使用習慣改變各種配置與微調。
TL膠皮專為低初速電動槍、手槍、競技短槍或是與 MARUI GBB 規格之長槍使用，建議初速約 0.8J~1.5J 左右。高初速需求建議選擇H.L.R.膠皮。
【對應彈重】
TL膠皮專為輕彈設計，最主要的目的是「增加輕彈的穩定性」，建議對應彈重為0.12g～0.32g。
【度數選擇】
一般正常條件下皆建議選用60度膠皮即可，50度膠皮建議用於低氣溫寒冷地區。
【規格說明】
TL膠皮包含 GBB 及 AEG 規格供玩家選擇。其中 GBB 規格是「常規版本」，可組裝與MARUI原廠相同規格(常規)的精密管與HOP座使用，只要規格相同，GBB長槍也可搭配此款膠皮。
※以上皆為基本使用原則，玩家仍可根據使用習慣改變各種配置與微調。
T-N.T. STUDIO launched a new HOP-UP bucking : TL-HOP bucking
Specification options : GBB / AEG
Degree options : 50° / 60°
Based on H.L.R. rubber, unlike most "rectangular" pressure zone designs, we followed the design of the arcuate pressure zone "from front to back, from left to right", which eases the angle of stress and release. . It is beneficial to improve ballistic stability and is suitable for low muzzle velocity pistols or competition short guns.
Recommended equipment: 0.12g～0.32g BBs
※GBB specifications: This product is a regular version and can be assembled with precision inner barrels and hop-up chambers with the same specifications as the original MARUI (general specifications).
※Starting from December 2023, the standard rubber for all T-N.T. THE ONE series upgrade kits will be changed to TL-HOP bucking.
※It is not applicable to the inner barrel with narrow window specification, please confirm whether there is enough space for the HOP window at the entrance of the inner barrel before installation.
Specification options : GBB / AEG
Degree options : 50° / 60°
Based on H.L.R. rubber, unlike most "rectangular" pressure zone designs, we followed the design of the arcuate pressure zone "from front to back, from left to right", which eases the angle of stress and release. . It is beneficial to improve ballistic stability and is suitable for low muzzle velocity pistols or competition short guns.
Recommended equipment: 0.12g～0.32g BBs
※GBB specifications: This product is a regular version and can be assembled with precision inner barrels and hop-up chambers with the same specifications as the original MARUI (general specifications).
※Starting from December 2023, the standard rubber for all T-N.T. THE ONE series upgrade kits will be changed to TL-HOP bucking.
※It is not applicable to the inner barrel with narrow window specification, please confirm whether there is enough space for the HOP window at the entrance of the inner barrel before installation.
More information:
【About muzzle speed】
TL-HOP BUCKING is designed for muzzle speed AEG, GBB pistols, competitive short guns, or rifles with MARUI GBB specification. The recommended muzzle speed is about 0.8J~1.5J. For high muzzle speed requirement, it is recommended to choose H.L.R. rubber.
【Corresponding weight of bbs】
TL-HOP BUCKING is specially designed for light bbs. Its main purpose is to "increase the stability of light bbs". The recommended equipment is 0.12g~0.32g bbs.
【Degree selection】
Under normal conditions, it is recommended to use 60 degrees rubber,50 degrees rubber generally recommended for cold areas.
【Specifications】
TL-HOP BUCKING has GBB and AEG specifications. The GBB specification is a regular version and can be assembled with precision inner barrels and hop-up chambers with the same specification as the original MARUI (general specification). With the same specification, GBB rifles can also be equipped with this rubber.
※The above are all basic principles of use. Players can still change various configurations and fine-tuning according to their usage habits.
TL-HOP BUCKING is designed for muzzle speed AEG, GBB pistols, competitive short guns, or rifles with MARUI GBB specification. The recommended muzzle speed is about 0.8J~1.5J. For high muzzle speed requirement, it is recommended to choose H.L.R. rubber.
【Corresponding weight of bbs】
TL-HOP BUCKING is specially designed for light bbs. Its main purpose is to "increase the stability of light bbs". The recommended equipment is 0.12g~0.32g bbs.
【Degree selection】
Under normal conditions, it is recommended to use 60 degrees rubber,50 degrees rubber generally recommended for cold areas.
【Specifications】
TL-HOP BUCKING has GBB and AEG specifications. The GBB specification is a regular version and can be assembled with precision inner barrels and hop-up chambers with the same specification as the original MARUI (general specification). With the same specification, GBB rifles can also be equipped with this rubber.
※The above are all basic principles of use. Players can still change various configurations and fine-tuning according to their usage habits.
TL+HOP BUCKING SERIES
規格選項 : GBB
度數選項 : 70°
度數選項 : 70°
TL-HOP及TL+HOP 膠皮設計的主要目的都是為了「輕彈專用」，專為低初速電AEG與GBB 、手槍、競技短槍或是與 MARUI GBB 規格之長槍使用。
●TL-HOP （黃皮）
基本款，有50度及60度可供選擇（一般建議使用60度即可）。
●TL+ HOP （紅皮）
硬度較高（70度），適合「高密集、高強度訓練」使用。
※建議對應彈重為0.12g～0.32g。
※建議初速約 0.8J~1.5J 左右。
●TL-HOP （黃皮）
基本款，有50度及60度可供選擇（一般建議使用60度即可）。
●TL+ HOP （紅皮）
硬度較高（70度），適合「高密集、高強度訓練」使用。
※建議對應彈重為0.12g～0.32g。
※建議初速約 0.8J~1.5J 左右。
Specification options : GBB
Degree options : 70°
Degree options : 70°
The main purpose of TL-HOP & TL+ HOP designs is for "light bbs". Suitable for muzzle speed AEG, GBB pistols, competitive short guns, or rifles with MARUI GBB specification.
●TL-HOP (YELLOW)
The basic model is available in 50 degrees and 60 degrees (60 degrees is generally recommended).
●TL+HOP (RED)
The hardness is relatively high (70 degrees), suitable for intensive and high-intensity training.
※The recommended equipment is 0.12g~0.32g bbs.
※The recommended muzzle speed is about 0.8J~1.5J.
●TL-HOP (YELLOW)
The basic model is available in 50 degrees and 60 degrees (60 degrees is generally recommended).
●TL+HOP (RED)
The hardness is relatively high (70 degrees), suitable for intensive and high-intensity training.
※The recommended equipment is 0.12g~0.32g bbs.
※The recommended muzzle speed is about 0.8J~1.5J.
【TL-HOP BUCKING】 RUBBER / 50°
【TL-HOP BUCKING】 RUBBER / 60°
【TL+ HOP BUCKING】 RUBBER / 70°
【TL-HOP BUCKING】RUBBER / 50° (Corresponding to T-N.T. hop-up chamber)
⚠️T-N.T. hop-up chamber can only be installed with special rubber. If you are not sure which model to match, please PM us on Facebook.
【TL-HOP BUCKING】RUBBER / 60° (Corresponding to T-N.T. hop-up chamber)
⚠️T-N.T. hop-up chamber can only be installed with special rubber. If you are not sure which model to match, please PM us on Facebook.
Material : Rubber
MADE IN TAIWAN
MADE IN TAIWAN