2022/11/28
|
Feature: 1. The airtight ring is lengthened and thickened, which can effectively increase the airtightness and improve the use efficiency. 2. Trim the angle of the brim, so that the brim is not easy to turn outward. 3. The wear-resistant silicone material can prolong the service life and is not easy to break. |
2022/11/15
|
〈ICS-TOMAHAWK COMBO SET〉
S+ 510mm：Original length S+ 580mm：To muzzle brake 
|
〈ICS-TOMAHAWK SAVE EFFORT SPRING M170〉
●Suitable for stock 9mm spring guide. 
|
2022/11/11
〈ICS CXP-TOMAHAWK NUB〉
Features :
●Changed to the best curved surface pressing, and strengthened the width of the pressing area.
●The tolerance of the round hole is smaller to avoid the side deviation of the nub ; the elastic rubber material makes the fine-tuning HOP more accurate.
●Different degrees of nub can be selected according to personal configuration requirements.
Features :
●Changed to the best curved surface pressing, and strengthened the width of the pressing area.
●The tolerance of the round hole is smaller to avoid the side deviation of the nub ; the elastic rubber material makes the fine-tuning HOP more accurate.
●Different degrees of nub can be selected according to personal configuration requirements.
2022/10/13
ARES SMLE British No.4 MK1 (T)
Pre-installed Scope & Mount / High Quality Wood
•95% Made of Grade 304 Stainless Steel with QPQ Finishing
•LENGTH : 1125mm
•WEIGHT : 4600g
•MAGAZINE : 35 rounds (6mm BB)
Compatible with T-N.T. ARES KAR98K Upgrade Kit Series
●S+535mm Retrofit Kit (inner barrel&rubber&hop-up chamber)
●M150 safe effort spring
●steel spring guide
Muzzle speed after installing the upgrade kit : 0.2g / 150m/s
Pre-installed Scope & Mount / High Quality Wood
•95% Made of Grade 304 Stainless Steel with QPQ Finishing
•LENGTH : 1125mm
•WEIGHT : 4600g
•MAGAZINE : 35 rounds (6mm BB)
Compatible with T-N.T. ARES KAR98K Upgrade Kit Series
●S+535mm Retrofit Kit (inner barrel&rubber&hop-up chamber)
●M150 safe effort spring
●steel spring guide
Muzzle speed after installing the upgrade kit : 0.2g / 150m/s
2022/09/07
Announcement
※T-N.T. KWA-M4 升級套件僅對應2021.01.01以前KWA-LM4 GBB系列
※T-N.T. KWA-M4 Retrofit kit only for older versions KWA-LM4 GBB series before 2021.01.01
※T-N.T. KWA-M4 升級套件僅對應2021.01.01以前KWA-LM4 GBB系列
※T-N.T. KWA-M4 Retrofit kit only for older versions KWA-LM4 GBB series before 2021.01.01
Unsupported version
2022/08/08
感謝法國的玩家Neo 035分享關於Thompson M1A1 WE / Cybergun 安裝T-N.T. WEPSTAS升級套件的測試影片!!
Thanks to French player : Neo 035 for sharing the test video of Thompson M1A1 WE / Cybergun installing the T-N.T. WEPSTAS upgrade kit !!
Thanks to French player : Neo 035 for sharing the test video of Thompson M1A1 WE / Cybergun installing the T-N.T. WEPSTAS upgrade kit !!
2022/07/13
New launched product !!
Suitable for FRONT GUIDE model :
● VFC BCM MCMR GBBR
● VFC VR16 URG-I CARBINE GBBR
● VFC VR16 URG-I CQB GBBR
● VFC KAC SR16E3 CARBINE MOD2 GBBR
● VFC KAC SR16E3 CQB MOD2 GBBR
Suitable for FRONT GUIDE model :
● VFC BCM MCMR GBBR
● VFC VR16 URG-I CARBINE GBBR
● VFC VR16 URG-I CQB GBBR
● VFC KAC SR16E3 CARBINE MOD2 GBBR
● VFC KAC SR16E3 CQB MOD2 GBBR
2022/06/15
2022/05/27
2022/05/25
2022/05/20
ARES 98K Unboxing !! Smells so gooooooood :D
|
|
|
2022/04/30
✨NEW DISTRIBUTOR IN FRANCE✨
AIRSOFT ENTREPOT
AIRSOFT ENTREPOT
2022/04/11
2022/03/30
2022/03/23
NEW！ARES Kar98k HOP-UP retrofit kit introduction
2022/03/15
2022/03/04
M.A.V. system - version for left and right hands Features: The position of the bolt handle can be exchanged on both sides, and the bolt handle only needs to be replaced with the corresponding bolt handle.
2022/02/25
|
|
2022/01/14
From now on, any purchase of TM-1 hop-up full retrofit kit or TM-1 hop-up chamber directly from us,TM-1 cylinder head as a gift!
2021/12/8
T-N.T. STUDIO launched a new HOP bucking : H.L.R. bucking !!
|
|
2021/10/1
Dear Customer,
Affected by the COVID-19 epidemic in 2020, the global raw materials and various costs will rise in 2021. We have always tried our best to avoid reflecting on the product price. Reluctantly, various costs continue to rise, T-N.T. insists not to reduce quality in order to maintain prices.
Therefore, we cautiously announce : All of T-N.T. products will adjust the prices from January 1st 2022.
Thanks for your understanding, and it is our responsibility to make sure that all customers can have the high-quality goods.
T-N.T. will continue to work hard to research more excellent products and bring more fun to everyone.
TAIWAN T-N.T. STUDIO
Jackie Chau
2021/08/26
【TAIWAN T-N.T. STUDIO】
M.A.V. SYSTEM for MARUI VSR-10 series.
M.A.V. system VSR plus air-volume set Introduction of contents:
●Aluminum CNC enlarged upper receiver
The common problem of VSR series upper receiver is corrected :
the tolerance of the locking groove of the handle is too large, so that there is no space for the handle to move back and forth after the handle is locked, so as to ensure that the bbs loading position is more accurate each time.
●Stainless steel cylinder with enlarged air-volume
The cylinder is enlarged and the slot position of the cylinder is corrected, and the effective air-volume is increased to about 43.9 c.c.
●Aluminum enlarged piston
Taking practicality and strength as considerations, the thickness of the inner wall of the piston is 2mm.
●Steel piston tail section
There are 45 degrees and 90 degrees to choose from (please inform us which style you need before ordering)
●Pistons are equipped with aluminum cylinder heads (10g) when they leave the factory, and steel heavier weight cylinder heads (30g) can be purchased separately.
●Pre-designed the screw hole on the piston head with Hexagon socket screws, suitable for any 4mm VSR air-brake on the market.
●Steel spring guide / 9mm (compatible with SRS spring)
●Four pieces of trigger assembly fixing screw spacers are included in the set to avoid excessively long screws from getting stuck the bolt.
●It can directly use the original VSR outer barrel and HOP-UP chamber, upper receiver rail, handle, bolt tail cover, trigger assembly and other parts.
M.A.V. SYSTEM for MARUI VSR-10 series.
M.A.V. system VSR plus air-volume set Introduction of contents:
●Aluminum CNC enlarged upper receiver
The common problem of VSR series upper receiver is corrected :
the tolerance of the locking groove of the handle is too large, so that there is no space for the handle to move back and forth after the handle is locked, so as to ensure that the bbs loading position is more accurate each time.
●Stainless steel cylinder with enlarged air-volume
The cylinder is enlarged and the slot position of the cylinder is corrected, and the effective air-volume is increased to about 43.9 c.c.
●Aluminum enlarged piston
Taking practicality and strength as considerations, the thickness of the inner wall of the piston is 2mm.
●Steel piston tail section
There are 45 degrees and 90 degrees to choose from (please inform us which style you need before ordering)
●Pistons are equipped with aluminum cylinder heads (10g) when they leave the factory, and steel heavier weight cylinder heads (30g) can be purchased separately.
●Pre-designed the screw hole on the piston head with Hexagon socket screws, suitable for any 4mm VSR air-brake on the market.
●Steel spring guide / 9mm (compatible with SRS spring)
●Four pieces of trigger assembly fixing screw spacers are included in the set to avoid excessively long screws from getting stuck the bolt.
●It can directly use the original VSR outer barrel and HOP-UP chamber, upper receiver rail, handle, bolt tail cover, trigger assembly and other parts.
2021/07/20
【TAIWAN T-N.T. STUDIO】
SRS Cylinder Head / Handle Assembly (Left-handed version) in stock!!
●The nozzle will not rotate to the right with the locking action of the pull handle during the ejection, which ensures that the ejection position is more accurate and effectively improves the stability!
●All components are made of medium carbon steel CNC with phosphate treatment on the surface.
●The inner diameter of the nozzle is 4.0mm, which can correspond to the use of SRS original air-brake.
●The set comes standard with a 16.0mm standard length nozzle, and a 15.8mm nozzle can be purchased for replacement if required.
【TAIWAN T-N.T. STUDIO】
SRS Cylinder Head / Handle Assembly (Left-handed version) in stock!!
●The nozzle will not rotate to the right with the locking action of the pull handle during the ejection, which ensures that the ejection position is more accurate and effectively improves the stability!
●All components are made of medium carbon steel CNC with phosphate treatment on the surface.
●The inner diameter of the nozzle is 4.0mm, which can correspond to the use of SRS original air-brake.
●The set comes standard with a 16.0mm standard length nozzle, and a 15.8mm nozzle can be purchased for replacement if required.
2021/05/07
【TAIWAN T-N.T. STUDIO】
SILVERBACK SRS / BOLT HEAD ASSEMBLY (Left-hand version) on stock !!
【PRECISION】
Linear BB feed against nozzle rotation.
【INDEPENDENT】
Nozzle and bolt operation.
【SMOOTH】
Bolt action with improved accuracy and airflow.
【ROBUST】
Carbon steel construction.
【INTERCHANGEABLE】
Customizable tuned nozzle length : 16.0mm & 15.8mm
【TAIWAN T-N.T. STUDIO】
SILVERBACK SRS / BOLT HEAD ASSEMBLY (Left-hand version) on stock !!
【PRECISION】
Linear BB feed against nozzle rotation.
【INDEPENDENT】
Nozzle and bolt operation.
【SMOOTH】
Bolt action with improved accuracy and airflow.
【ROBUST】
Carbon steel construction.
【INTERCHANGEABLE】
Customizable tuned nozzle length : 16.0mm & 15.8mm
2021/04/17
【TAIWAN T-N.T. STUDIO】
SIVERBACK SRS / BOLT HEAD ASSEMBLY (Right-hand version) On sale at April,22 !!
【PRECISION】
Linear BB feed against nozzle rotation.
【INDEPENDENT】
Nozzle and bolt operation.
【SMOOTH】
Bolt action with improved accuracy and airflow.
【ROBUST】
Carbon steel construction.
【INTERCHANGEABLE】
Customizable tuned nozzle length : 16.0mm & 15.8mm
SIVERBACK SRS / BOLT HEAD ASSEMBLY (Right-hand version) On sale at April,22 !!
【PRECISION】
Linear BB feed against nozzle rotation.
【INDEPENDENT】
Nozzle and bolt operation.
【SMOOTH】
Bolt action with improved accuracy and airflow.
【ROBUST】
Carbon steel construction.
【INTERCHANGEABLE】
Customizable tuned nozzle length : 16.0mm & 15.8mm
2021/02/09
～Chinese Lunar New Year of 2021~
T-N.T. will be off from Feb.11th (Thr.)~Feb.14th (Sun.), all messages and emails will be delayed during the holidays.
Hope all friends stay in safe and healthy, HAPPY NEW YEAR 2021!!
T-N.T. will be off from Feb.11th (Thr.)~Feb.14th (Sun.), all messages and emails will be delayed during the holidays.
Hope all friends stay in safe and healthy, HAPPY NEW YEAR 2021!!
2021/02/03
SRS / BOLT HEAD ASSEMBLY, COMING SOON...
2021/01/18
S&T / SW Kar98k upgrade kit re-stock!!
2020/12/25
M.A.V. 44 system for MARUI VSR series, COMING SOON in early 2021!!
M.A.V. 44 system for MARUI VSR series, COMING SOON in early 2021!!
2020/8/29
New arrival - VSR Steel cylinder head !!
●Medium carbon steel/CNC strengthened cylinder head.
●After recalculating the length of the nozzle, the BBs can reach the best position when loading, and the ballistic stability is improved.
●Corresponding regular spec. VSR bucking of various brands, not easy to cause damage to the bucking entrance burrs and affect the initial velocity and ballistic stability.
●Corresponding to the MARUI specification VSR cylinders on the market, like ML / EdGI etc.
New arrival - VSR Steel cylinder head !!
●Medium carbon steel/CNC strengthened cylinder head.
●After recalculating the length of the nozzle, the BBs can reach the best position when loading, and the ballistic stability is improved.
●Corresponding regular spec. VSR bucking of various brands, not easy to cause damage to the bucking entrance burrs and affect the initial velocity and ballistic stability.
●Corresponding to the MARUI specification VSR cylinders on the market, like ML / EdGI etc.
2020/7/10
Sorry for waiting a loooong time everyone, TALON Mk-1 VSR HOP chamber is coming, in stock now!!
Sorry for waiting a loooong time everyone, TALON Mk-1 VSR HOP chamber is coming, in stock now!!
2020/5/14
【TAIWAN T-N.T. STUDIO】
Dear friends who love PTW, sorry for waiting a long time !!
The TW System retrofit kit for PTW, CTW, DTW restock again !!
If want to purchase the TW system retrofit kit, please PM to our Facebook fanspage, thanks ;)
T-N.T. STUDIO fanspage : https://www.facebook.com/TNT.studio.tw/
or E-mail to : chaujackie9@gmail.com
【TAIWAN T-N.T. STUDIO】
Dear friends who love PTW, sorry for waiting a long time !!
The TW System retrofit kit for PTW, CTW, DTW restock again !!
If want to purchase the TW system retrofit kit, please PM to our Facebook fanspage, thanks ;)
T-N.T. STUDIO fanspage : https://www.facebook.com/TNT.studio.tw/
or E-mail to : chaujackie9@gmail.com
2020/1/22
The CNC HOP chamber / Full retrofit kit for S&T M1903 IN STOCK NOW!!
Welcome visit our distributors website to purchase, or contact us directly : https://www.facebook.com/TNT.studio.tw/
Welcome visit our distributors website to purchase, or contact us directly : https://www.facebook.com/TNT.studio.tw/
2019/12/19
《Official announcement》
The "Begadi GmbH" became our business partner in Germany!!
Website link : https://www.begadi.com/tnt-studio.html/
Dear clients please click "SALES LOCATIONS" and visit "Begadi GmbH" to get the T-N.T. products all you need :)
TAIWAN T-N.T. STUDIO
Jackie
《Official announcement》
The "Begadi GmbH" became our business partner in Germany!!
Website link : https://www.begadi.com/tnt-studio.html/
Dear clients please click "SALES LOCATIONS" and visit "Begadi GmbH" to get the T-N.T. products all you need :)
TAIWAN T-N.T. STUDIO
Jackie
2019/12/13
【T-N.T.】One-piece CNC HOP chamber for S&T M1903, COMING SOOOOON!!
【T-N.T.】One-piece CNC HOP chamber for S&T M1903, COMING SOOOOON!!
2019/9/29
【T-N.T.】HOP LEVER & NUB for MARUI spec. VSR, available now !!
●HOP LEVER x1、Positioning nub 70° blue x1, 80° red x1
●Aluminum/CNC/Anode red.
※For MARUI spec. VSR
(The tolerance of the HOP cahamber of each brand VSR may be slightly different.it may need to do some mod according to the actual situation during installation, recommended have DIY capability)
【T-N.T.】HOP LEVER & NUB for MARUI spec. VSR, available now !!
●HOP LEVER x1、Positioning nub 70° blue x1, 80° red x1
●Aluminum/CNC/Anode red.
※For MARUI spec. VSR
(The tolerance of the HOP cahamber of each brand VSR may be slightly different.it may need to do some mod according to the actual situation during installation, recommended have DIY capability)
2019/7/29
【T-N.T.】TERMINATOR - SRS HTI RETROFIT KIT
COMING SOON......
【T-N.T.】TERMINATOR - SRS HTI RETROFIT KIT
COMING SOON......
2019/7/16
【T-N.T.】NEW SRS HOP CHAMBER - TERMINATOR
【T-N.T.】NEW SRS HOP CHAMBER - TERMINATOR
2019/6/25
【T-N.T.】NEW SRS HOP CHAMBER - TERMINATOR Now in production phase.
In order to provide you with excellent products, please be patient :)
many thanks to everyone who supports T-N.T. !! ;)
T-N.T. STUDIO / Owner
Jackie
【T-N.T.】NEW SRS HOP CHAMBER - TERMINATOR Now in production phase.
In order to provide you with excellent products, please be patient :)
many thanks to everyone who supports T-N.T. !! ;)
T-N.T. STUDIO / Owner
Jackie
2019/4/27
【T-N.T.】NEW SRS HOP CHAMBER - PROTOTYPE
COMING SOOOOOOOOON!!
【T-N.T.】NEW SRS HOP CHAMBER - PROTOTYPE
COMING SOOOOOOOOON!!
|
|
2019/4/22
Hello everyone :)
T-N.T. has always been committed to continuous research and development of better products and countless practical tests, in order to enable players to get a more stable flight path and a longer effective range.
In view of the excellent performance of T-HOP, now introduce you :
New TR-HOP bucking!!
In addition to the appearance of sandblasted black, the structure inside the rubber has also changed, use it with T-N.T. S+ solar eclipse precision air-cushion inner barrel, we believe that you can get better precision and stability of your airsoft firearms, and the overall performance will advance to a higher level, T-N.T. hope to bring more fun to everyone ;)
Let's see the internal structure through simple graphic explanations, and also recommend you can try this NEW TR-HOP bucking!!
Of course, NEW TR-HOP bucking can correspond to T-N.T. upcoming SRS NEW HOP CHAMBER!!
(this bucking is VSR type, and we have so many types, so PLEASE explain what kind of gun you want to use before ordering, thank you!!)
Hello everyone :)
T-N.T. has always been committed to continuous research and development of better products and countless practical tests, in order to enable players to get a more stable flight path and a longer effective range.
In view of the excellent performance of T-HOP, now introduce you :
New TR-HOP bucking!!
In addition to the appearance of sandblasted black, the structure inside the rubber has also changed, use it with T-N.T. S+ solar eclipse precision air-cushion inner barrel, we believe that you can get better precision and stability of your airsoft firearms, and the overall performance will advance to a higher level, T-N.T. hope to bring more fun to everyone ;)
Let's see the internal structure through simple graphic explanations, and also recommend you can try this NEW TR-HOP bucking!!
Of course, NEW TR-HOP bucking can correspond to T-N.T. upcoming SRS NEW HOP CHAMBER!!
(this bucking is VSR type, and we have so many types, so PLEASE explain what kind of gun you want to use before ordering, thank you!!)
2019/4/19
Hello dear customers :
In view of the recent customer response " purchased T-N.T. S+ inner barrel, but why without positioning area designed in the S+ barrel's entry?? "
Sorry, we explain to every customer here :
S+ barrel the micro hump at the entrance is just only 0.04mm high, so it is not easy to see directly with the eyes. When taking photos, we also use light and shadow refraction and adjust photo contrast to help you understand the structure design.
It is recommended that you can look at the brighter background; or put a BB at the entrance of the inner barrel and use finger to simulate HOP to fix the BB, then you can see it :)
Here are some small methods for reference, thank you all for support T-N.T. ;)
Hello dear customers :
In view of the recent customer response " purchased T-N.T. S+ inner barrel, but why without positioning area designed in the S+ barrel's entry?? "
Sorry, we explain to every customer here :
S+ barrel the micro hump at the entrance is just only 0.04mm high, so it is not easy to see directly with the eyes. When taking photos, we also use light and shadow refraction and adjust photo contrast to help you understand the structure design.
It is recommended that you can look at the brighter background; or put a BB at the entrance of the inner barrel and use finger to simulate HOP to fix the BB, then you can see it :)
Here are some small methods for reference, thank you all for support T-N.T. ;)
2019/4/18
Hello everyone who likes the classic Kar 98k, sorry for waiting so long!!
T-N.T. just launched the new upgrade kit for S&T / Kar 98k!!
Hello everyone who likes the classic Kar 98k, sorry for waiting so long!!
T-N.T. just launched the new upgrade kit for S&T / Kar 98k!!
|
|
Let the S&T Kar 98k in your hands turn into a killing weapon in wargame!!
It's no longer just a wall-mounted!!
Products page :
http://www.taiwangaote.com/upgrade-kit.html
It's no longer just a wall-mounted!!
Products page :
http://www.taiwangaote.com/upgrade-kit.html
2019/04/14
|
|
Hello everyone, we have 2 different type of piston kit for KWA MP7 GBB now.
Left one is for stock bolt (locking screw from the end)
Righ one is foe ESD Aluminum bolt (Locking screw from the front)
More better air-sealed, more better service life!!
Use with T-N.T. KWA MP7 retrofit kit, turn your KWA MP7 into a laser beam gun!!
Left one is for stock bolt (locking screw from the end)
Righ one is foe ESD Aluminum bolt (Locking screw from the front)
More better air-sealed, more better service life!!
Use with T-N.T. KWA MP7 retrofit kit, turn your KWA MP7 into a laser beam gun!!
2019/02/02
Finally!!
Friends who like WWII guns and retro guns have been waiting for a long time!!
T-N.T. CUSTOM / S&T 98K (spring power) outdoor test & review.
Finally!!
Friends who like WWII guns and retro guns have been waiting for a long time!!
T-N.T. CUSTOM / S&T 98K (spring power) outdoor test & review.
2019/02/02
Dear friends,
thank you all the supportive T-N.T. clients, we will continue to develop and produce better products for everyone, if you encounter any problems with the installation adjustment, please feel free to contact us on our Facebook Fans page : https://www.facebook.com/TNT.studio.tw/
T-N.T. 在此祝各位 新年快樂，恭喜發財～
HAPPY CHINESE YEAR and Kung Hei Fat Choi !! ;)
Dear friends,
thank you all the supportive T-N.T. clients, we will continue to develop and produce better products for everyone, if you encounter any problems with the installation adjustment, please feel free to contact us on our Facebook Fans page : https://www.facebook.com/TNT.studio.tw/
T-N.T. 在此祝各位 新年快樂，恭喜發財～
HAPPY CHINESE YEAR and Kung Hei Fat Choi !! ;)
2019/01/28
Hello everyone, believe many people know that KWA TAR21 GBB is on the market now.
Maybe some friends want to know: Can TAR 21 be upgrade modified?
The answer is ... YES!!
The KWA TAR 21 GBB HOP chamber assembly is just same as KWA AR series GBB, so don't worry guys, T-N.T. KWA AR retrofit kit still install directly ;)
【T-N.T.】KWA TAR21 GBB S+ 430mm Retrofit kit
●T-HOP bucking
●T-N.T. KWA-AR HOP chamber
●S+ 430mm inner barrel
Hello everyone, believe many people know that KWA TAR21 GBB is on the market now.
Maybe some friends want to know: Can TAR 21 be upgrade modified?
The answer is ... YES!!
The KWA TAR 21 GBB HOP chamber assembly is just same as KWA AR series GBB, so don't worry guys, T-N.T. KWA AR retrofit kit still install directly ;)
【T-N.T.】KWA TAR21 GBB S+ 430mm Retrofit kit
●T-HOP bucking
●T-N.T. KWA-AR HOP chamber
●S+ 430mm inner barrel
|
|
2019/01/11
Hello everyone, " T-N.T. MK23 S+ kit " on stock now!!
Make your MK23 become mini sniper!! ;)
" T-N.T. MK23 S+ kit " include :
●TR-HOP bucking *1
●S+ inner barrel 132mm *1
Support MARUI/Y&P MK23 Gas non-blow back pistol.
FULL RANGE PRODUCT > STANDARD HOP KIT > GBBP KIT.
Hello everyone, " T-N.T. MK23 S+ kit " on stock now!!
Make your MK23 become mini sniper!! ;)
" T-N.T. MK23 S+ kit " include :
●TR-HOP bucking *1
●S+ inner barrel 132mm *1
Support MARUI/Y&P MK23 Gas non-blow back pistol.
FULL RANGE PRODUCT > STANDARD HOP KIT > GBBP KIT.
2018/12/24
Hello everyone,
because many customers don’t know that we also sell GBB pistol inner barrel...
so we make the pistol kit became a separate pagination :)
Full range product > Standard kit > GBBP kit
Suitable for Mainstream brands GBBP : TM, WE etc.
and...
Happy Merry Christmas!!
Hello everyone,
because many customers don’t know that we also sell GBB pistol inner barrel...
so we make the pistol kit became a separate pagination :)
Full range product > Standard kit > GBBP kit
Suitable for Mainstream brands GBBP : TM, WE etc.
and...
Happy Merry Christmas!!
2018/11/24
【T-N.T.】AWP/TYPE96 Retrofit kit, 15% OFF NOW!!
For :
WELL AWP(MB01) / APS2(MB05) / AW.338(MB08)
MARUZEN TYPE96
●S+ 500mm inner barrel ---- $4250 TWD
15% OFF--- 3610 TWD
●H+ 500mm inner barrel ---- $4950 TWD
15% OFF--- 4200 TWD
●HS+ 500mm inner barrel ---- $5400 TWD
15% OFF--- 4590 TWD
Get your T-N.T. retrofit kit and turns your SNIPER RIFLE really become " ONE SHOT ONE KILL " !!
This limited offer ends ~ 2018/11/30
【T-N.T.】AWP/TYPE96 Retrofit kit, 15% OFF NOW!!
For :
WELL AWP(MB01) / APS2(MB05) / AW.338(MB08)
MARUZEN TYPE96
●S+ 500mm inner barrel ---- $4250 TWD
15% OFF--- 3610 TWD
●H+ 500mm inner barrel ---- $4950 TWD
15% OFF--- 4200 TWD
●HS+ 500mm inner barrel ---- $5400 TWD
15% OFF--- 4590 TWD
Get your T-N.T. retrofit kit and turns your SNIPER RIFLE really become " ONE SHOT ONE KILL " !!
This limited offer ends ~ 2018/11/30
2018/11/19
To everyone who likes WWII airsoft：
Are you still troubled by can't finding WWII airsoft with excellent performance?
Don't want your own WWII AIRSOFT has always been a wall ornament?
Maybe there will be what you want here ;)
SWIT AIRSOFT : https://www.switairsoft.com/
SWIT AIRSOFT FACEBOOK：https://www.facebook.com/SWITAirsoft/
To everyone who likes WWII airsoft：
Are you still troubled by can't finding WWII airsoft with excellent performance?
Don't want your own WWII AIRSOFT has always been a wall ornament?
Maybe there will be what you want here ;)
SWIT AIRSOFT : https://www.switairsoft.com/
SWIT AIRSOFT FACEBOOK：https://www.facebook.com/SWITAirsoft/
2018/09/18
《Official announcement》
Dear clients, please click "SALES LOCATIONS" and visit "Tiger111hk" to get the T-N.T. products all you need ;)
TAIWAN T-N.T. STUDIO
Jackie
《Official announcement》
Dear clients, please click "SALES LOCATIONS" and visit "Tiger111hk" to get the T-N.T. products all you need ;)
TAIWAN T-N.T. STUDIO
Jackie
2018/08/05
WARNING!!
↘↘↘ The "Solar eclipse" is coming !! ↙↙↙
↘↘↘ The "Solar eclipse" is coming !! ↙↙↙
2018/08/04
【T-N.T. HOP bucking for Silver Back - SRS sniper rifle】Avaiable now!!
【T-N.T. new wide ver. HOP nub】BLUE - 60° / RED - 70° , Avaiable now!!
【T-N.T. HOP bucking for Silver Back - SRS sniper rifle】Avaiable now!!
【T-N.T. new wide ver. HOP nub】BLUE - 60° / RED - 70° , Avaiable now!!
|
|
2018/07/23
【T-N.T. STAINLESS STEEL CYLINDER KIT for S&T M1903】
【T-N.T. STEEL SEAR SET for S&T M1903】
【T-N.T. M1903 520mm KIT】---- T-HOP bucking & Air-cusion inner barrel.
Now all in stock!!
Makes your S&T M1903 turns killing weapon in wargame!!
It's no longer just a wall-mounted!!
【T-N.T. STAINLESS STEEL CYLINDER KIT for S&T M1903】
【T-N.T. STEEL SEAR SET for S&T M1903】
【T-N.T. M1903 520mm KIT】---- T-HOP bucking & Air-cusion inner barrel.
Now all in stock!!
Makes your S&T M1903 turns killing weapon in wargame!!
It's no longer just a wall-mounted!!
|
|
2018/07/07
T-N.T. System for S&T M1903 kit on stock!!
●520mm Precision Air-cushion inner barrel
●T-HOP bucking (VSR spec.)
The specially designed slot position of the inner barrel of this set, make you simple and painless install direct on S&T M1903!!
T-N.T. specially made inner barrel for S&T M1903. The position of the side slots are slightly different from that of the general spec, but this inner barrel can also be installed in VSR, AEG spec. ;)
Pic 2 :
Top: T-N.T. Corresponding S&T M1903 520mm precision air-cushion inner barrel.
Bottom: T-N.T. general spec. precision air-cushion inner barrel.
Pic 3 :
T-N.T. System S&T M1903 520mm kit.
●520mm Precision Air-cushion inner barrel
●T-HOP bucking (VSR spec.)
T-N.T. System for S&T M1903 kit on stock!!
●520mm Precision Air-cushion inner barrel
●T-HOP bucking (VSR spec.)
The specially designed slot position of the inner barrel of this set, make you simple and painless install direct on S&T M1903!!
T-N.T. specially made inner barrel for S&T M1903. The position of the side slots are slightly different from that of the general spec, but this inner barrel can also be installed in VSR, AEG spec. ;)
Pic 2 :
Top: T-N.T. Corresponding S&T M1903 520mm precision air-cushion inner barrel.
Bottom: T-N.T. general spec. precision air-cushion inner barrel.
Pic 3 :
T-N.T. System S&T M1903 520mm kit.
●520mm Precision Air-cushion inner barrel
●T-HOP bucking (VSR spec.)
2018/07/02
R&D...
Dear friends, guess what is it? ;)
R&D...
Dear friends, guess what is it? ;)
2018/07/02
《Official announcement》
The "Skirmshop LTD" became T-N.T. official sole distributor for countries : Netherlands, U.K.
Dear clients please click "SALES LOCATIONS" and visit "Skirmshop LTD" to get the T-N.T. products all you need ;)
TAIWAN T-N.T. STUDIO
Jackie
《Official announcement》
The "Skirmshop LTD" became T-N.T. official sole distributor for countries : Netherlands, U.K.
Dear clients please click "SALES LOCATIONS" and visit "Skirmshop LTD" to get the T-N.T. products all you need ;)
TAIWAN T-N.T. STUDIO
Jackie
2018/06/19
《Official announcement》
The "CATUS AIRSOFT SHOP" became T-N.T. official sole distributor for countries : Slovakia, Czech Republic, Slovenia, Poland, Austria and Hungary.
Dear clients please click "SALES LOCATIONS" and visit "CATUS AIRSOFT SHOP" to get the good products all you need :)
TAIWAN T-N.T. STUDIO
Jackie
《Official announcement》
The "CATUS AIRSOFT SHOP" became T-N.T. official sole distributor for countries : Slovakia, Czech Republic, Slovenia, Poland, Austria and Hungary.
Dear clients please click "SALES LOCATIONS" and visit "CATUS AIRSOFT SHOP" to get the good products all you need :)
TAIWAN T-N.T. STUDIO
Jackie
2018/06/03
T-N.T. Development - performance enhancement components :
Corresponds S&T M1903 - steel bolt assembly.
(steel cylinder, steel spring guide, aluminum piston)
COMING SOON !!
T-N.T. Development - performance enhancement components :
Corresponds S&T M1903 - steel bolt assembly.
(steel cylinder, steel spring guide, aluminum piston)
COMING SOON !!
|
|
|
2018/05/24
VFC HK416A5 GBB Retrofit kit with T-HOP bucking
In stock now!!
Please contact our distributors, or contact T-N.T. directly, THANK YOU.
VFC HK416A5 GBB Retrofit kit with T-HOP bucking
In stock now!!
Please contact our distributors, or contact T-N.T. directly, THANK YOU.
|
|
2018/04/28
VFC HK416A5 GBB Retrofit kit with T-HOP bucking
Can be install on :
VFC HK 416A5 Gen2. GBB
VFC HK 416 Gen2. GBB
VFC HK M27 IAR Gen2. GBB
COMING SOON...
Please stay tuned with T-N.T. !!
FACEBOOK FANS PAGE : https://www.facebook.com/TNT.studio.tw/
VFC HK416A5 GBB Retrofit kit with T-HOP bucking
Can be install on :
VFC HK 416A5 Gen2. GBB
VFC HK 416 Gen2. GBB
VFC HK M27 IAR Gen2. GBB
COMING SOON...
Please stay tuned with T-N.T. !!
FACEBOOK FANS PAGE : https://www.facebook.com/TNT.studio.tw/
|
|
2018/02/22
To Dear all T-N.T. clients :
In view of some customer reaction of the pipe wall is deformed by the inadvertent locking of the fixing screws on both sides of the HOP chamber in T-N.T. CNC retrofit kit.
To Dear all T-N.T. clients :
In view of some customer reaction of the pipe wall is deformed by the inadvertent locking of the fixing screws on both sides of the HOP chamber in T-N.T. CNC retrofit kit.
In this announcement :
all of T-N.T. CNC retrofit kit after many inspections in the assembly, before packaging and before leaving the factory, we do not know that the pipe wall is deformed but still packed and shipped.
So in the future, all of T-N.T. CNC retrofit kit series will be drop some screws glue and just lightly lock the screws to avoid this situation like the photo.
T-N.T. also appealed to dear clients : in the purchase of the retrofit kit before you install on your love gun, own discretion adjust the degree of locking the barrel fixing screw, just only need to be able to hold the inner barrel will not shake around. Please do not tighten the screws too hard to avoid deformation of the pipe wall as photo.
Thank you all the supportive T-N.T. clients.
HAPPY NEW YEAR and Kung Hei Fat Choi !!
all of T-N.T. CNC retrofit kit after many inspections in the assembly, before packaging and before leaving the factory, we do not know that the pipe wall is deformed but still packed and shipped.
So in the future, all of T-N.T. CNC retrofit kit series will be drop some screws glue and just lightly lock the screws to avoid this situation like the photo.
T-N.T. also appealed to dear clients : in the purchase of the retrofit kit before you install on your love gun, own discretion adjust the degree of locking the barrel fixing screw, just only need to be able to hold the inner barrel will not shake around. Please do not tighten the screws too hard to avoid deformation of the pipe wall as photo.
Thank you all the supportive T-N.T. clients.
HAPPY NEW YEAR and Kung Hei Fat Choi !!
2017/12/26
【Page update】
FULL RANGE PRODUCT－TNT - HOP UP BUCKING－T-HOP UP SYSTEM.
【Page update】
FULL RANGE PRODUCT－TNT - HOP UP BUCKING－T-HOP UP SYSTEM.
2017/12/11
T-N.T. just launched new product - Retrofit kit for VFC MP5 GBB series !!
Corresponding model : MP5 A2/A3/A4/A5/NAVY/SD3.
T-N.T. just launched new product - Retrofit kit for VFC MP5 GBB series !!
Corresponding model : MP5 A2/A3/A4/A5/NAVY/SD3.
2017/12/08
2018 New masterpiece『T-HOP UP SYSTEM』!!
This product "T-HOP UP SYSTEM" is a high-end modification, players can have more DIY space, suitable for top players to use. Of course, we also take into account the needs of the general players, the product is also produced complete sets of sales, the same maintained T-N.T. style : regular, straight install, free modification, high compatibility. We hope "T-HOP UP SYSTEM" can bring you the best possible results in less time and spend more time enjoying the fun.
"T-HOP UP SYSTEM" in the hardware to make some changes:
●HOP-UP bucking part :
Strengthen the internal part of the area, no dots design. With the aluminum CNC curved pressure block, BB can have a greater force area to produce higher on the rotation efficiency.
◎AEG：Correspond to the market of conventional AEG series.
◎GBB：With T-N.T. produced sections of the CNC HOP chamber, corresponds to the major brand GBB.
◎SNIPER：Almost all sections of the sniper rifle are applicable.
◎TW SYSTEM：With a dedicated CNC aluminum pressure block.
● T-N.T. Precision air-cushion inner barrel part :
As well as maintaining the T-N.T. patent - outlet air-cushion design, extend the length of the HOP-UP push down area, rubber shrink area design, so that rubber elasticity is more functional, and not because of the pressure cause deformation.
●HOP pressure block part :
Aluminum CNC precision manufacturing curved pressure block, the design of the chamfering of the front and rear sides, not due to under pressure cause deformation. The top can be replaced with the individual preferences of different elasticity of the pressure bar, change the overall elasticity or left and right by fine tuning to get a precise loading position, smooth under pressure and then make the trajectory more accurate and extended, even if the low kinetic energy can still control the heavier BB, to achieve the effect of wind resistance and extension range.
The "T-HOP UP System" of course also maintain the consistent style of T-N.T. : conventional, direct installation, free modification, high compatibility. We wish everyone available the shortest possible time to achieve the best results, with more time to enjoy the fun.
"T-HOP UP System" allows you to the your battlefield or shooting target, we hope bring for you to create greater room for adjustment, towards a smaller range of CTC result.
TAIWAN GAO-TE always carefully to make every product, just to serve everyone and bring more fun for you ;)
2018 New masterpiece『T-HOP UP SYSTEM』!!
This product "T-HOP UP SYSTEM" is a high-end modification, players can have more DIY space, suitable for top players to use. Of course, we also take into account the needs of the general players, the product is also produced complete sets of sales, the same maintained T-N.T. style : regular, straight install, free modification, high compatibility. We hope "T-HOP UP SYSTEM" can bring you the best possible results in less time and spend more time enjoying the fun.
"T-HOP UP SYSTEM" in the hardware to make some changes:
●HOP-UP bucking part :
Strengthen the internal part of the area, no dots design. With the aluminum CNC curved pressure block, BB can have a greater force area to produce higher on the rotation efficiency.
◎AEG：Correspond to the market of conventional AEG series.
◎GBB：With T-N.T. produced sections of the CNC HOP chamber, corresponds to the major brand GBB.
◎SNIPER：Almost all sections of the sniper rifle are applicable.
◎TW SYSTEM：With a dedicated CNC aluminum pressure block.
● T-N.T. Precision air-cushion inner barrel part :
As well as maintaining the T-N.T. patent - outlet air-cushion design, extend the length of the HOP-UP push down area, rubber shrink area design, so that rubber elasticity is more functional, and not because of the pressure cause deformation.
●HOP pressure block part :
Aluminum CNC precision manufacturing curved pressure block, the design of the chamfering of the front and rear sides, not due to under pressure cause deformation. The top can be replaced with the individual preferences of different elasticity of the pressure bar, change the overall elasticity or left and right by fine tuning to get a precise loading position, smooth under pressure and then make the trajectory more accurate and extended, even if the low kinetic energy can still control the heavier BB, to achieve the effect of wind resistance and extension range.
The "T-HOP UP System" of course also maintain the consistent style of T-N.T. : conventional, direct installation, free modification, high compatibility. We wish everyone available the shortest possible time to achieve the best results, with more time to enjoy the fun.
"T-HOP UP System" allows you to the your battlefield or shooting target, we hope bring for you to create greater room for adjustment, towards a smaller range of CTC result.
TAIWAN GAO-TE always carefully to make every product, just to serve everyone and bring more fun for you ;)
2017/11/17
『T-HOP System』
AEG series.
GBB series.
SNIPER series.
KWA M series.
GHK AR series.
VFC M4/416/VR16 series.
VIPER TECH series.
TW System series.
COMING SOON.....
『T-HOP System』
AEG series.
GBB series.
SNIPER series.
KWA M series.
GHK AR series.
VFC M4/416/VR16 series.
VIPER TECH series.
TW System series.
COMING SOON.....
2017/10/11
2017 New masterpiece：『T-HOP UP System』!!
More advanced easy to adjust conversion platform :
In the existing conventional system,
not to damage the structure, free modification, directly installed modified components,
the HOP prussure block is "curved push down" design,
BB can have more rotation effect, so that players have more usage space!!
Please refer to the following performance test video...
2017 New masterpiece：『T-HOP UP System』!!
More advanced easy to adjust conversion platform :
In the existing conventional system,
not to damage the structure, free modification, directly installed modified components,
the HOP prussure block is "curved push down" design,
BB can have more rotation effect, so that players have more usage space!!
Please refer to the following performance test video...
2017/09/10
T-N.T. APS-X HOP-UP System
New Ver. HOP-UP chamber
for GHK / VFC GBBR!!
T-N.T. developed for GHK AR GBB series CNC HOP-UP chamber, Widely supported by domestic and foreign friends. In order to make your rifle's hand guard can have more choices, T-N.T. specially made the new HOP chamber - can be used with two adjustment mechanisms, let your love gun can have more convenient and diverse changes, to bring you more fun!
For details,
please refer to the picture or Retrofit kit - HOP chamber page - GHK/VFC ,
and just indicate what kind of style when ordering.
Please contact the district dealers, thanks :)
T-N.T. APS-X HOP-UP System
New Ver. HOP-UP chamber
for GHK / VFC GBBR!!
T-N.T. developed for GHK AR GBB series CNC HOP-UP chamber, Widely supported by domestic and foreign friends. In order to make your rifle's hand guard can have more choices, T-N.T. specially made the new HOP chamber - can be used with two adjustment mechanisms, let your love gun can have more convenient and diverse changes, to bring you more fun!
For details,
please refer to the picture or Retrofit kit - HOP chamber page - GHK/VFC ,
and just indicate what kind of style when ordering.
Please contact the district dealers, thanks :)
2017/07/28
T-N.T. APS-X HOP-UP System
TW System Ritrofit Kit Arrival !!
Correspond : PTW / DTW / CTW
The retrofit kit include T-N.T. H+ inner barrel.
More details :
http://www.taiwangaote.com/store/c25/TW_SYSTEM_-_PTW%2FCTW%2FDTW_Rrtrofit_kit.html
T-N.T. APS-X HOP-UP System
TW System Ritrofit Kit Arrival !!
Correspond : PTW / DTW / CTW
The retrofit kit include T-N.T. H+ inner barrel.
More details :
http://www.taiwangaote.com/store/c25/TW_SYSTEM_-_PTW%2FCTW%2FDTW_Rrtrofit_kit.html
2017/07/21
【T-N.T. APS-X HOP-UP System】
TYPE96/WELL AWP/AW.338 Ritrofit Kit Avaible!!
Correspond : WELL MB01.05.08 / TYPE96.
【T-N.T. APS-X HOP-UP System】
TYPE96/WELL AWP/AW.338 Ritrofit Kit Avaible!!
Correspond : WELL MB01.05.08 / TYPE96.
2017/06/25
【T-N.T. APS-X HOP-UP System】
KSC MP9 GBB Ritrofit Kit Arrival !!
Golden / Black
【T-N.T. APS-X HOP-UP System】
KSC MP9 GBB Ritrofit Kit Arrival !!
Golden / Black
2017/06/22
【T-N.T. APS-X HOP-UP System】
HOP-UP chamber for TYPE96/WELL AWP/WELL AW.338
Coming soon...
【T-N.T. APS-X HOP-UP System】
HOP-UP chamber for TYPE96/WELL AWP/WELL AW.338
Coming soon...
|
|
|