KJ 1911 GBBP recoil issue solution
If you feel when shooting your KJ 1911 (magazine full gas), but...
●Recoil is weak...
●BBs always drop down early...
That's because the gap between the magazine and the nozzle is too large, which leads to the above issue.
Don't worry about that, T-N.T. show you how to fix it!!
●Recoil is weak...
●BBs always drop down early...
That's because the gap between the magazine and the nozzle is too large, which leads to the above issue.
Don't worry about that, T-N.T. show you how to fix it!!
1. First, dissemble your KJ 1911.
2. Dissemble the slide and take out the nozzle.
|
|
3. Prepare the marker pen and the acrylic sheet (thickness about 0.5-0.6mm).
4. Measure the width of the gas inlet.
|
|
5. Marker on the acrylic sheet. (with gas inlet)
|
|
6. Cut it off and use the rasp polished flat slightly.
|
|
7. All sides must use rasp to chamfer, like the photo. (side view)
8. Use a rasp to grind the gas inlet slightly, make the joint surface rougher slightly.
|
|
9. Use super glue to bond the acrylic sheet on nozzle.
10. Use the rasp to slightly polish the four sides to make it smooth. (side view)
|
|
11. Assemble all parts, smear a little silicone oil.
12. Assemble all parts back, done!!
