『THE ONE』 【HI-CAPA / 1911 Retrofit Kit】S+ 97mm
🔥全球首創、專利產品 Global innovation & Patented product!
"TDC & Adjust without slide off"
✨1911 / HI-CAPA 一體式 HOP-UP座總成 / 成套套組✨
產品介紹:
1.擺脫傳統方式,玩家們可直接透過膛座底部調整HOP-UP,無需拆解滑套即可做微調,大幅增加便利性與效率。
2. HOP座本體為一體式設計,採用合金精密鑄造,調整環為鋼製品,膠皮全包覆式的設計氣密度優秀且安裝步驟簡單快速。
3.本產品共用目前市售各品牌MARUI規格GBB膠皮,後勤補給非常便利。
4. HOP-UP調整方式為TDC方式:可提供調整環平均的下壓力度,徹底擺脫傳統下壓鋼片設計之左右受力不均問題。
5.使用常規1.5mm內六角板手,HOP採無段式調整,可進行更細緻的微調;更大的HOP調整範圍,不論使用輕彈或重彈都可輕鬆駕馭。
6.調整環設計有回推彈簧,維持HOP-UP不易鬆動,有效維持調整完畢後的理想下壓量。
本產品提供以下可供選購:
●HOP-UP管皮座總成套組 (標配為TL-HOP膠皮、精密管、HOP座、內附一支內部調整工具)。
●單HOP-UP座套組 (標配為TL-HOP膠皮)。
※220mm以下內管皆無氣墊槽設計。
※可對應品牌與款式:MARUI、WE、KJ、2011...1911/CAPA系列。
※我們以MARUI為採吋標準,不能保證品牌不同的公差,或許需要自行小修,建議有DIY基本功力者再購買。
—————————————————————————————--
【TAIWAN T-N.T. STUDIO】"THE ONE" Series Chapter 2
✨1911 / HI-CAPA GBBP dedicated One-piece TDC HOP-UP chamber assembly / Complete set✨
Feature of product:
1. Unlike the traditional method, players can directly adjust the HOP-UP through the bottom of the chamber without removing the pistol slide, which greatly increases convenience and efficiency.
2. The body of the HOP chamber is designed in one piece and made of alloy precision casting,and the adjustment is made of steel. The rubber-covered design has excellent air-tightness and the installation steps are simple and fast.
3. This product is shared with various brands of MARUI specification GBB rubber on the market, and it is very convenient to replenish.
4. Change the HOP-UP adjustment method to TDC :It can provide the average down force of the adjustment ring, and completely get rid of the problem of uneven force on the left and right of the traditional down pressure steel design.
5.Adjust with a regular 1.5mm Allen wrench so that the HOP step-less adjustment allows for more fine-tuning; a larger HOP adjustment range makes it easy to control whether you use light flicks or heavy flicks.
6.Adjustment ring is designed with a push-back spring to keep the HOP-UP not easy to loosen, effectively maintaining the ideal amount of depression after adjustment.
This product offers the following options:
●This product provides:
Complete set (standard configuration is TL-HOP bucking, precision inner barrel, HOP chamber,includes an adjustment tool.)
Single HOP-UP chamber set (standard configuration is TL-HOP bucking)
※Length below 220mm without air-cushion groove design.
※Corresponding brands and versions: MARUI, WE, KJ, 2011...1911/CAPA series
※All retrofit kits are assembled by our professional technicians,we use MARUI as the inch standard, but there may still be slight tolerances between different batches of airsoft guns. It is recommended that you must have relative DIY ability before purchasing.