INTRODUCTION OF T-N.T. UPGRADE KITS / VSR-10
【T-N.T. APS-X HOP-UP SYSTEM】
TALON MK-1 VSR-10 FULL HOP-UP RETROFIT KIT
Features :
1. One-piece HOP-UP chamber base, all accessories are CNC precision production.
2. Full-coverage design of bucking, 100% air-tightness can be achieved by simple installation.
3. The positioning HOP lever and nub is not afraid of the displacement due to vibration.
4. The number of HOP-UP adjustment grids has been greatly increased to 35 grids, when using different BB types, fine-tuning can be more detailed.
5. The design of the U-shaped adjusting ring makes the HOP press down evenly and completely improves the problem of uneven force on the unilateral side of the original adjusting rod.
6. The design of the detachable BB stopper at the entrance of the HOP chamber makes fine-tune and centering of the HOP bucking more easier and convenient.
7. The HOP-UP function can be quickly adjusted on the side of the original outer barrel without using other tools.
Suitable models:
MARUI specification VSR-10 series or clones.
(There may be tolerance problems between different brands of VSR-10, it is recommended to have relative DIY ability)
【T-N.T. APS-X HOP-UP SYSTEM】
MAX AIR VOLUME SYSTEM
FOR : MARUI-VSR10 SERIES.
M.A.V. system set Introduction of contents :
●Aluminum CNC enlarged upper receiver
The common problem of VSR series upper receiver is : the tolerance of the handle locking groove is too large.
M.A.V. upper receiver corrected this issue, so that there is no space for the handle to move back and forth after the handle is locked, so as to ensure that the BBs loading position is more accurate each time.
●Stainless steel cylinder with enlarged air-volume
The cylinder is enlarged and the slot position of the cylinder is corrected, and the effective air-volume is increased to about 43.9 c.c.
●Aluminum enlarged piston
Taking practicality and strength as considerations, the thickness of the inner wall of the piston is 2mm.
●Steel piston tail section
There are 45 degrees and 90 degrees to choose from (please inform us which style you need before ordering)
●Pistons are equipped with aluminum cylinder heads (10g) when they leave the factory, and steel heavier weight cylinder heads (30g) can be purchased separately.
●Pre-designed the screw hole on the piston head with Hexagon socket screws, suitable for any 4mm VSR air-brake on the market.
●Steel 9mm spring guide. (compatible with SRS spring)
●Four pieces of trigger assembly fixing screw spacers are included in the set to avoid excessively long screws from getting stuck the bolt.
●M.A.V. can directly install the original VSR outer barrel and HOP-UP chamber, upper receiver rail, handle, bolt tail cover, trigger assembly and other parts.