INTRODUCTION OF T-N.T. UPGRADE KITS / SRS A1 A2 HTI
【T-N.T. APS-X HOP-UP SYSTEM】
防轉推嘴拉柄總成 BOLT HEAD ASSEMBLY
For : SILVERBACK-SRSA1/A2 (Not suitable for HTI)
●The nozzle will not rotate to the right with the locking action of the pull handle during the ejection, which ensures that the ejection position is more accurate and effectively improves the stability!
●All components are CNC precision machined, made of medium carbon steel, phosphate surface treatment, taking into account both beauty and durability.
●The inner diameter of the nozzle is 4.0mm, which can correspond to the use of SRS original air-brake.
●The set comes standard with a 16.0mm standard length nozzle, and a 15.8mm nozzle can be purchased for replacement if required.
16.0mm nozzle : Original length.
15.8mm nozzle : Suitable for use with more heavier BBs.
Nozzle inner diameter : 4mm.
【T-N.T. APS-X HOP-UP SYSTEM】
TERMINATOR SRSA1/A2/HTI FULL HOP-UP RETROFIT KIT
Feature of product :
1. T-N.T. Original : Positioning HOP lever & nub, so that the HOP nub no longer sways or slides back and forth, and is completely fits the HOP nub to achieve the best pressing effect and give full play to the complete performance of the HOP bucking .
2. Stainless steel HOP lever adopts embedded design and totally does not slide around. The HOP lever is designed to be the maximum moment of the body, and the bending angle is calculated to reach the vertical when the HOP lever is pressed down, to improve the phenomenon that the short lever is offset before and after the pressing due to the short torque, so that the force surface can be more even, and the obtained more topspin.
3. The body of the HOP chamber is made of aluminum alloy and made of CNC precision machining. A reference line is marked at the entrance of the chamber, which makes it easier for players to determine when installing, and saves time for installation and adjustment.
4. The bucking changed to use TR-HOP VSR bucking, which has a thick inlet end and excellent air-tightness! Complete air-tightness is simply achieved without any further processing.
5. Precisely calculate the final position of the optimal BB, so that the BB can be positioned more accurately at the initial point, in order to achieve the maximum friction force, and then obtain a longer and more stable shooting range!
6. The HOP chamber adopts total 4 screws to fix the inner barrel, which makes the inner barrel more stable and avoids accidental locking to the deformation of the inner barrel wall, the shock-absorbing O-ring at the end of the HOP chamber can also slow down the release of the piston The rear impact force on the HOP chamber improves the stability even more!
MARUI specification VSR-10 or clones
(There may be tolerance problems between different brands of VSR-10, it is recommended to have relative DIY ability)