【T-N.T. APS-X HOP-UP SYSTEM】
TALON MK-1 (TM-1)
VSR SERIES HOP-UP FULL RETROFIT KIT
FOR : ALL MAJOR BRANDS TM SPEC. VSR
The TM-1 VSR HOP CHAMBER Features:
1. One piece chamber base & all component made by CNC
2. Positioning HOP lever & HOP-UP clicks level increased to 35 !!
3. U-shaped adjustment ring design : make the HOP surface equally stressed, eliminating the problem of uneven force on the unilateral side of the original.
4. Separated stopper part design : more convenient to adjust HOP bucking center.
5. Bucking fully covered & foolproof design : easy to achieve 100% air-sealed.
6. Uses the same as original - quick adjust bar of the outer barrel side, which can quickly adjust the HOP-UP.
7. Support all major brands TM specifications VSR.
※ It is recommended to apply a little screw glue before tightening the screws, and please don’t tighten them too much to avoid deformation of the inner wall ※
TALON MK-1 (TM-1)
VSR SERIES HOP-UP FULL RETROFIT KIT
FOR : ALL MAJOR BRANDS TM SPEC. VSR
The TM-1 VSR HOP CHAMBER Features:
1. One piece chamber base & all component made by CNC
2. Positioning HOP lever & HOP-UP clicks level increased to 35 !!
3. U-shaped adjustment ring design : make the HOP surface equally stressed, eliminating the problem of uneven force on the unilateral side of the original.
4. Separated stopper part design : more convenient to adjust HOP bucking center.
5. Bucking fully covered & foolproof design : easy to achieve 100% air-sealed.
6. Uses the same as original - quick adjust bar of the outer barrel side, which can quickly adjust the HOP-UP.
7. Support all major brands TM specifications VSR.
※ It is recommended to apply a little screw glue before tightening the screws, and please don’t tighten them too much to avoid deformation of the inner wall ※
【Positioning HOP lever】
In addition to the positioning HOP nub, this time we directly made the HOP clicks on the HOP lever, and the clicks was also greatly increased from the original 20 to 35 clicks!! We believe that many players must have encountered the dilemma of adjusting HOP : 1 click too much, 1 click too less... that's really annoying. The more densly and clear clicks, for the adjustment of details when using different weights of BBs can be more convenient!! |
【Positioning HOP lever - Spring designed】
There is a small spring on the HOP lower lever, the function is to prevent the HOP lever have no effect HOP-UP, so that the adjustment of HOP-UP can be more reliable. |
【TM-1 HOP chamber - Bucking fully covered & foolproof design】
The TM-1 HOP chamber adopts the bucking fully covered design, without using PTFE, simply achieve 100% air-sealed!! And the foolproof groove design can avoid wrong bucking installation. |
【Check the HOP center before installing the stopper part】
We believed that most players will encounter a problem when modification the VSR : when adjusting the HOP, it is easy to be blocked by the stopper, and it is also very inconvenient to push the stopper to adjust it... One of the major features of the TM-1 HOP chamber : clear vision when centered the HOP bucking, so fine-tuned is also very convenient. After fine-tuned complete, just lock the stopper part on chamber, can save a lot of time!! |
|
|
【Separated stopper part】
One of the main features of the TM-1 HOP chamber :
clear vision when centered the HOP bucking, so fine-tuned is also very convenient.
Simply put the stopper into the front section, very easy to install.
After fine-tuned complete, just lock the stopper part on chamber, can save a lot of time!!
One of the main features of the TM-1 HOP chamber :
clear vision when centered the HOP bucking, so fine-tuned is also very convenient.
Simply put the stopper into the front section, very easy to install.
After fine-tuned complete, just lock the stopper part on chamber, can save a lot of time!!
【Stainless steel HOP-UP adjustment bar】
The TM-1 HOP chamber uses the same as original - quick adjust bar of the outer barrel side, which can quickly adjust the HOP-UP regardless of the field game or shooting sport.
The TM-1 HOP chamber uses the same as original - quick adjust bar of the outer barrel side, which can quickly adjust the HOP-UP regardless of the field game or shooting sport.
Material: Aluminum, Bronze, Rubber
MADE IN TAIWAN
MADE IN TAIWAN
●All products are recommended to have DIY ability to make fine adjustments and modifications.
●Before the modify, recommended to check and exclude the original issues to achieve the best results, or commissioned by the store to modified.
●Replacement of kits does not mean that can solve all the original parts of the issues, sometimes still have to modify the other components to achieve the best performance.
●Before the modify, recommended to check and exclude the original issues to achieve the best results, or commissioned by the store to modified.
●Replacement of kits does not mean that can solve all the original parts of the issues, sometimes still have to modify the other components to achieve the best performance.